Chrysler 361, 383, 400, 413, 426 (Wedge), 440, B/RB Specifications

Firing Order

 

Torque Specs

These specs may not be correct for your application. Verify your engine specs with a service manual for your year and model, always torque bolts in three equal increments
Bolts or Parts Lube or Sealer Torque to:
Main Caps Engine Oil 85 ft-lbs.
Warning!!!     If you are using ARP bolts, you MUST use their specs.  Click Here!
Connecting Rod Bolts (Plain) Engine Oil 45 ft-lbs.
Connecting Rod Bolts (Heavy Duty) Engine Oil 55 ft-lbs.
Crankshaft Rear Bearing Seal Engine Oil 30 ft-lbs.
Cylinder Heads Iron Heads Engine oil (blind hole) Sealer (water jacket)   70 ft-lbs.
Rocker Shaft brackets Engine Oil 25 ft-lbs.
Oil Pump Cover Engine Oil 10 ft-lbs.
Oil Pump Engine Oil 35 ft-lbs.
Oil Pan Engine Oil 15 ft-lbs.
Camshaft Locking Bolt Thread Locker 35 ft-lbs.
Timing Cover Engine Oil 10 ft-lbs.
Intake Manifold (Cast Iron Heads) Non- Hardening Sealer 40 ft-lbs.
Valve Cover Engine Oil 6 ft-lbs.
Water Pump Non- Hardening Sealer 30 ft-lbs.
Fuel Pump Engine Oil 30 ft-lbs.
Starter mounting Bolts Engine Oil 50 ft-lbs.
Exhaust Manifold Anti-Seize Lubricant 30 ft-lbs.
Spark Plugs No Lube or Sealer 20 ft-lbs.
Flexplate/Flywheel Cap Screws Thread Locker 55 ft-lbs.
Flexplate to Torque Converter Thread Locker 270 in-lbs.
Centerbolt (Harmonic Damper) Engine Oil 135 ft-lbs.
Bellhousing (Transmission to Block) Engine Oil 50 ft-lbs.
It's only fair to share...Share on Facebook0Share on Google+0Tweet about this on TwitterShare on LinkedIn0