Zora Mid-Engine Corvette To Show Face By 2017

2014-Chevrolet-Corvette-C7-Stingray-logo Yes, you read that right. In 2017, the Corvette will finally introduce a mid-engine layout it was always meant for, with the C8 Corvette Zora, or perhaps the C7 Corvette ZR1. Of course, those in-the-know have long heard murmurings of a mid-engine ‘Vette, and Chevy has even built several prototypes in the past – such as the 1976 Aerovette and the 1990 CERV III. But General Motors has always entertained the idea with caution, knowing that it’s an expensive change, and one that could potentially alienate a lot of the brand’s die hard loyalists. Apparently, Chevrolet has decided that America is finally ready. The new Zora-ZR1 supercar will sit at the top of the Corvette range, above the 650 hp Z06, and (for a time) stand alone in offering the MR layout, likely sold alongside the current C7. It’s expected to still maintain Chevrolet’s beloved Small Block in some form, although specific powertrain details are a mystery. And while reports believe that the Zora will keep the aluminum space frame currently seen in the C7 in some way, we have reasons to believe the Corvette C8 will introduce a new platform entirely. As for the body, we could see carbon fiber doors over the current fiberglass ones. and while Car and Driver believes the chassis will still make use of reworked magnetorheological dampers, control arms and composite leaf springs, we also believe a new suspension system will be introduced. Though, at this moment, the shroud of mystery is still very much covering the 2017 Corvette Zora-ZR1, and only serves to pique our interest even more. After all, the news of a mid-engine American sportscar is something we’ve not had since the Pontiac Fiero. We just want to buy the C8 a drink and ask all about its powertrain options, new architecture, when it thinks it’ll be ready to become America’s only Corvette, etc. But as they say, good things come to those who wait. Credit: http://gmauthority.com/blog/2014/09/zora-mid-engine-corvette-to-show-face-by-2017/#ixzz3D8tbQZRd
It's only fair to share...Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn

Finding Lost Horsepower with Manton Pushrod Technology

By John Baechtel Extracting every last scrap of performance from a racing engine requires a detailed examination of each individual engine component to determine if there’s lost power due to undiscovered problems such as poor design, component compatibility issues or inaccurate tuning. Among the many critical components in your engine, the pushrod’s contribution is rarely considered as part of the overall power equation. For many builders, it’s simply a matter of selecting a hardened pushrod with the correct length and tip. Unfortunately that leaves a lot of untapped performance on the table, according to the experts at Manton Pushrods. “The pushrod is the least considered part of any racing engine,” says Manton’s Al Perkins. “Pushrods are absolutely critical to valvetrain stability.” Read more
It's only fair to share...Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn

Early Variable Valve Timing

10388654_10152253276182540_1234556780668506935_n Prehistoric valve timing! Three gears centered between the cam and crank gears, with an idler in the middle. A bar moved the idler in either direction to advance or retard the timing—activated under full power or not. A cable operated a small piston nudged by oil pressure, moving the bar and idler gear. The driver pushed the cable one way to advance, or the other to retard timing. Invented by Ollie Norris while at Offenhauser in the mid-1960s.
It's only fair to share...Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn
1 2 3